keywords= IEC epoxy products

Page 4

  Internet  Epoxy  Confederation

 

Now you can purchase marine - floor epoxy direct from IEC

Buy Epoxy Paint - Marine resin - pour on bar tops direct from IEC

 


Epoxy Paint - Marine Epoxy Resins, Floor Coatings

 Available Directly From

Internet Epoxy Confederation

 

(Thanks to EpoxyUSA)

Pls order from the EpoxyUSA website

 

EPOXY PRODUCTS

Top Selling Products Listed In Red

 

Basic No Blush (tm) marine epoxy

- a favorite replacement for the Leading Brand at half the price of their non blushing epoxy. Popular enough you can google Basic No Blush marine epoxy and read lots of comments.

 

"I just wanted to let you know that a couple of months ago I purchased 1.5 gallons of epoxy from you for injection into a port stringer on a water-ski boat I recently purchased.  I have owned quite a number of boats power and sail requiring repairs to bring them back to where they should be. Your product was excellent in every respect. I thinned it myself to the specifications I felt the repair required and it turned out superb in every regard. I will be using your product in the future for blister repairs to a large sailboat I own and just wanted to thank you for providing an excellent product with value to the consumer."  Best Regards, Steve

 (email 12/16/13 to Progressive Epoxy Polymers, Inc. -- epoxyproducts.com -- attn: Paul Oman)

 

The Wind & Oar Boat School is located in Portland, OR (http://wind-and-oar-boatschool.org/). Currently (7/11) they are working on a St Ayles skiff, with a group of 10 completely novice women doing the build. Its the first all women build and the first on the west coast. The St Ayles Skiff is a Iain Oughtred design done for the Scottish Fisheries Museum and now the cornerstone of the Scottish Coastal Rowing Project (http://scottishcoastalrowing.org/). Last fall WoodenBoat Publications picked up the concept and got 5 high schools in Maine to start the boat and I am mirroring the idea for high schools in Portland. The first youth boat will start this fall but in the mean time a group of women approached me about building one too. The Wind & Oar Boat School is building communities through building boats. We encourage groups of all shapes and sizes to experience the camaraderie, team building, collaboration, and self confidence that arise from working towards a common goal.

When it came time to decide about epoxies, the school turned to Michael Bogoger (Dory-man) for advice. He suggested your product and we've been extremely happy with it. The forgiving nature of the Basic No-Blush (tm) marine epoxy has been ideal for a school situation where many people are mixing and consistency is not necessarily high. Michael has covered our build on his blog several times and this link http://dory-man.blogspot.com/2011/06/wind-and-oar-boat-building-school.html) is to one of his posts where you can see us using the No Blush epoxy product.

Whether you want a group team building exercise or a grade school introduction to wood and water, the Wind & Oar Boat School will tailor a course to fit your needs. Our first build is a group of 10 women, of diverse ages, who without any woodworking experience are now building a 22 foot St Ayles Skiff.

Basic No Blush IS THE ONLY MARINE EPOXY FORMULATED WITH EXPENSIVE BUBBLE BREAKERS to give a more flawless, perfect finish.

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

What more can we say to convince you that Basic No Blush marine epoxy has the best quality and value for individual and professionals working around boats of all kinds?

 Most of our customers started out with the 'easy to find' big name brand marine epoxies, but then switched over to Basic No Blush because of price as well as its forgiving nature and predictable and consistant performance under a wide range of conditions

 

Also used for creating or re-coating / sealing outdoor pebble decks. Find in the Marine Epoxy section or in the Special Purpose section. This product has its own web site --  No Blush Marine Epoxy .

basic no blush marine epoxy

Basic No Blush Marine Epoxy

a top selling boat repair/building 2 part epoxy resin system

 

"Paul - My little company in upstate XX produces seaplane pontoons and an occasional racing sailboat. Loved your basic no blush marine epoxy. You should mention that when mixing large batches (1/2 gallon) it doesn't do the exotherm thing as quickly as ZZZZ. Brand. On a warm day with ZZZZ you almost can't finish mixing before it starts to get hot hot hot."

 

Jack and Kathleen 7/16: "A few years ago we had a contractor install 450 sq. ft. of pebble stone and after a couple years it needed re-coating in the areas affected by the Sun. I researched different products and picked one that I thought sounded good and ordered it. Well that product didn't last very long so I continued researching online and found Paul's website. After reading all the great information I ordered the No Blush product and some of the recommended split rollers. We waited for a 3-day no rain forecast and even though it was a warm 72-degree morning I had my wife mix small batches while I applied the No Blush without any hardening problems and we finished the job in a couple of hours. The finished job looks better than when first installed by the contractor.

Many thanks"

Why Basic No Blush  (tm) epoxy is the BEST in its class:

1. A formulated blended resin system (not repackaged raw chemicals)

2) Uses NON BLUSHING curing agent for blush free results

3) not too thick, not too thin, not too brittle - ever see an epoxy surface with millions of tiny cracks? It is brittle, repackaged (see #1) not formulated epoxy

4) the only marine type epoxy with bubble breakers for superior flaw free finishes and uniform properties and appearance and allows for thicker, multiple layers with better clarity

5) the only epoxy adduct marine type epoxy for superior enhanced properties (standard cure only)

6) strong user support / feedback

7) 24/7 support email marineepoxy@gmail.com

8) less expensive than the other formulated epoxies which still don't have many of the advantages listed here

 

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Premium No Blush (tm) marine epoxy

- this resin system uses a non hazmat curing agent and is know for the smooth high gloss finish it produces. Find in the Marine Epoxy section.

Paul,


Let me say how happy we are with your Premium blend marine epoxy resin. We were out putting on two large pieces of Kevlar material on our 32.5 ft Woods Eclipse Cat. Each piece then was about 32 feel long be about four ft. The Premium blend worked great even in 85 degrees temp. Two of us were able to put on the kevlar using about 3/4 gallon batches split in two, using two X-Tra large kitty litter containers to apply it with.....

Thanks again for the Premium blend -50 gallons last year ....LOVE IT!
JIM - (Canada)

--- and about 18 months later....


Hi Paul and co.;


I just did a test with your Premium blend marine epoxy and a very highly recommended slow epoxy from a major competitor.


I work in a hot plastic tent with heavy biax fiberglass so exothermic reaction/pot life is very important! So I tested the Premium blend and your best competitor. The competitor 's epoxy and your Premium were pored about two inches deep in plastic containers about two inches deep. The other stuff heated up quite warm in about twenty-five minutes or so at 22C degrees ,not bad but yours lasted much longer ! I didn't need it as the plastic cup got only a little warm ,not as much as the other guys by far!

So send me 50 gallons more please! I'll get in touch for the details.
thanks
Jim (Canada)

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Low V (tm) epoxy

- a very thin, low viscosity, solvent free epoxy. Often solvent thinned, thickened or used as is. Bonds to wet or damp surfaces. Find in the Marine Epoxy section.

"Paul - My little company in upstate XX produces seaplane pontoons and an occasional racing sailboat. Loved your basic no blush marine epoxy. You should mention that when mixing large batches (1/2 gallon) it doesn't do the exotherm thing as quickly as ZZZZ. Brand. On a warm day with ZZZZ you almost can't finish mixing before it starts to get hot hot hot."

 

Jack and Kathleen 7/16: "A few years ago we had a contractor install 450 sq. ft. of pebble stone and after a couple years it needed re-coating in the areas affected by the Sun. I researched different products and picked one that I thought sounded good and ordered it. Well that product didn't last very long so I continued researching online and found Paul's website. After reading all the great information I ordered the No Blush product and some of the recommended split rollers. We waited for a 3-day no rain forecast and even though it was a warm 72-degree morning I had my wife mix small batches while I applied the No Blush without any hardening problems and we finished the job in a couple of hours. The finished job looks better than when first installed by the contractor.

Many thanks"

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Industrial Floor Epoxy (tm)

- a commercial grade, solvent free, floor epoxy paint available in several sizes and two colors. Find in the Special Purpose section. 48 oz test kits available. Top Quality, no frills 0% VOC floor epoxy paint for garage and other applications.

floor epoxy paint

Garage Floor Epoxy Paint

 

Quick Buy -- INDUSTRIAL FLOOR (tm) EPOXY PAINT - LIGHT GRAY or BEIGE -- Now

Hi,

Just wanted to say Thanks for the great product (Industrial Floor Epoxy) and service on my Garage floor project. It set up great and once I got the knack for Pot Life times, I was off and running laying down the mixture!!

I should have taken before and after photos but it really came out great and most important, I can see the strength of the Epoxy as a protective barrier. I look forward to winter now with all it's wrath! This time I'm ready!

Hope to be in touch soon for other projects.

Mark


Dear Sir, We applied the Industrial Floor Epoxy in our work trailer yesterday, and I swept off the excess sand today. We are very pleased with the results. None of us had any particular experience with this kind of application, but we followed the instructions, had a fairly cool morning to do the work, and managed to complete the application in about 90 minutes, dividing the work and mixing epoxy in three sections. I would recommend this material to friends looking to do similar work. Thank you for your assistance, the all-purpose sand was quite adequate for our needs.

R.C. - Virginia Transportation Research Council (9/2010)

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

 

WE OFFER:

solvent free commercial grade epoxy floor paint (no frills contractor kits) - INDUSTRIAL FLOOR EPOXY (tm)

professional grade water based floor epoxy (not the low end Box Store product) - WATER BOND FLOOR  EPOXY (tm)

epoxy floor paint with non-skid already in it. - ROUGH COAT FLOOR EPOXY (tm)

direct links to colored chip manufactures - high end clear top coat options

 

WHY THIS IS THE BEST SOLVENT FREE FLOOR EPOXY AVAILABLE

Order this two part EPOXY Product NOW

Bio Clear 810 (tm) table top epoxy

- used for pour on table top and bar top projects. Find in the Special Purpose section. 48  oz test kits available.

Quick Buy -- DIY BIO CLEAR 810 (tm) BAR TOP EPOXY --

(under "Special Purpose Epoxies")

one 3-gal kit will cover 18 sf at 1/4 inch thick

Other Bar Top options

"As a professional woodworker, I was recently contracted to make a 14 foot curling table for a customer. After doing some research, I came across your Bio-Clear 810 epoxy product and chose it for the price and the eccentric web site. I figured that such a "different" web site MUST be offset by a truly quality product.

I was right!

This was the first time I had ever attempted an epoxy pour, so after some practice and reading the provided literature, I figured out the technique for pouring a 14 foot x 22" top.

My customer was delighted with the product and I hope to sell many more of these curling tables in the United States.


Thanks guys ! " -  John

 


This is why you REALLY need to use our Bio Clear 810 epoxy on your bar top

A commercial epoxy pour contractor recently used our Bio Clear 810 to replace a badly yellowed epoxy covered logo in the INSIDE  floor of regional airport terminal with our 'almost no yellowing' Bio Clear 810 (cyclo-aliphatic epoxies to the rescue!)

This is a good example of why you want to use only a cyclo-aliphatic epoxy for your bar top. The other clear epoxies sold for table tops suffer from bad (excessive?) yellowing (and I bet they don't even mention it on their web sites). 

Because of the yellowing, it is generally not a good idea to have a poured epoxy table / bar outside in the sun, but if you do - use our cycloaliphatic epoxy and keep it covered when not in use.

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Water Gard 300 (tm) epoxy paint

- an industrial grade epoxy paint in light blue or white. Can be applied underwater. Used for marine barrier coats and swimming pool touch-ups and repairs. Find in the Epoxy Paint section. 1.5 quart, 3 quart and 3 gal kit size.

 

Paul,

I'm not the kind of person to give feedback on products or services but I must comment on the Water Gard 300 product. I purchased a home 4 years ago with a fiberglass pool and 2 years ago it started to significantly chip. Long story short, after significant analysis from multiple experts, it turns out that the pool had ruptured and was repaired. Unfortunately the repair person applied the fiberglass topcoat incorrectly and it is all coming off. Luckily the pool is structurally sound, just very ugly to look at. Estimates to fix it range from $8,000 to $25,000 and no one would guarantee that the entire pool would not collapse after draining the water which would require an entire replacement.

 

After a year of searching, and countless attempts at other solutions, I came across your product. This product is amazing! I still can't believe it's even possible to apply a paint (sorry epoxy) underwater. I used a 14 foot extension pole with a roller to apply the paint/epoxy. The most time consuming part was mixing parts A and B together. I purchased the 3 gallon size but since I was working alone I mixed small batches since the pot life was short. For roughly $350 my pool looks brand new! I can't thank you enough. I've attached some before and after pictures.

Thanks again,

David

 

underwater epoxy paint

Underwater Epoxy Paint

 

"Just wanted to let you know that the white Water Gard 300 epoxy I purchased to repair my fiberglass swimming pool underwater worked great!!!! Did test spots on shallow area and steps, and It looks like it did 31 years ago. Going to tackle the deep area next. Thank You So Much!! I will share with others!" ----- Helen from LA.

 

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Corro Coat FC 2100A (tm) - kevlar (tm) and ceramic reinforced, solvent free, epoxy paint

- can be applied underwater. Find in the Epoxy Paint section. 48 oz and 1.5 gal kits.

 

"I had been fighting a hydro-static leak between my floor and foundation on the south wall of our basement that has a terrace garden on the exterior for about the last 5 or 6 years. I have applied several coats of concrete patch that were very ineffective.

When I saw the ad on the internet for this product I thought that it might work, so I emailed Paul Oman and we exchanged thoughts and ideas. I purchased the product to try it out. Early in April I applied one coat and sat back during the rainy season to see what would happen. We had record rains in St. Louis this April and so-far-so-good; no leaks. I am convinced that it is a good product".

Order this two part EPOXY Product NOW

Wet Dry 700 (tm) - kevlar (tm) reinforced epoxy paste

- can be applied underwater. Find in the Thick Epoxy section. One quart and one gallon kits.

Jeff (1/2013)

I cannot believe how incredible this Wet Dry 700 is. It's revolutionary. The original repair to my storm shelter would have lasted years if the shelter would just stop shifting around in the ground. DON'T STOP SELLING THIS STUFF.

"The Wet Dry 700 epoxy paste worked great for patching for the rotted dingy transom. I cut out the rot, fitted new oak pieces, and patched with the Wet Dry 700 epoxy. Easy as pie." -- John 1/15

 

 (10/2013)     Comments: Returning  -  Underwater boat repair

My third or fourth order and am still quite pleased with the result. It has many uses above and below the water line.

 

 

EMERGENCY YACHT  UNDERWATER REPAIR

A Case Study Using Progressive Epoxy Polymer's  Underwater Epoxy - an early version of our WET DRY 700 Underwater Epoxy (BUY NOW).

 Underwater epoxy for Emergency hull repair - sinking yacht Case Study - now  in book form:

http://www.bansheeboat.com/files/testimonials.html

"I feel that any person taking a boat to sea anywhere, anytime, should carry your product aboard and know how to apply it. If I can assist you in distributing or advertising your product, I am more than happy to do so." (Wet Dry 700 and/or Corro Coat FC 2100 A - keep 1 - 2 gallons onboard if you venture offshore)

Joy S. and Leslie B., US Yacht Banshee
Authors: Escape From Hermit Island

underwater epoxy

 


The only Epoxy Putty reinforced with Kevlar (tm) microfibers and feldspar ceramic for an incredible hard and tough product. This is a hard working epoxy paste (about as thick as wall mud or cake icing).

 

Can be applied Underwater too! (it has saved lots of boats, leaking swimming pools and sinking floating homes) - Nothing else like it in the market.

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

 


Splash Zone A-788 (tm)  epoxy putty

- the 'Grand Daddy' of thick epoxy putty products. Getting harder and harder to find. Find in the Thick Epoxy section.

Order this product by calling 603-435-7199 anytime or order online using this link to our Primary Web Store:  EPOXYPRODUCTS

Epoxy Cream (tm) epoxy gel

- an easy to use creamy epoxy for fairing and non structural filling. Find in the Thick Epoxy section. 48 oz and 1.5 gal units.

Order this product by calling 603-435-7199 anytime or order online using this link to our Primary Web Store:  EPOXYPRODUCTS

Fiberglass tape

- rolls of 3 inch wide or 4 inch wide fiberglass cloth (tape), misc. brushes and rollers.  Find in the Accessory section.


Order any of these products at the secure EpoxyUSA e-commerce storefront

We thank you for your support!

goto EpoxyUSA


 

Homepage

 

Page 1

Links

 

Page 2

Member

Sites

Page 3

Products

Available Here

Page 4

Questions

Help Page

Page 5

 


Now you can purchase marine - floor epoxy direct from IEC

Buy Epoxy Paint - Marine resin - pour on bar tops direct from IEC

###